Installation of windows

PVC directly thanks to modern technologies is available at any time of the year, the most important thing is that the air temperature in this case is at least minus fifteen degrees. During the installation of PVC windows, certain types of work are done, that is, the old frames are removed, then check the window opening due to the vertical plumb line, and also the horizontal level. Prepare holes for fasteners around the perimeter of the window, and also in the wall. Install windows thanks to special elements. The joints between the window and the wall are sealed due to foam, external window sills are installed.

Before installing plastic windows in Krasnodar, it is important to prepare the window frame in order to install in the opening. To do this, the wings are removed from it, the double -glazed window is removed. The frame with an attached profile is naturally put in the opening directly on the technological wedges. Then it is aligned on a horizontal plane, and also on the sides. After marking, carefully remove the frame and drill holes for fasteners, after which, fixed in the opening with wedges and fixed thanks to the elements of fasteners. Everything is checked by the general leveling, as well as the lack of profile deflections in the places of fastening.

There are two methods of attaching a window frame, each of them has the pros and cons of. During the first methodology, the wings are removed from the window, and also double -glazed windows, but this allows you to strengthen the window in any of the openings, in addition, the load will be, transferred unambiguously to the internal reinforcement of the plastic window. In the second option, the installation of the window easily goes along the level and plumb line, while there are no traces on the end surface of the plastic.