Bulk floor

In the 90s of the past century, the massive use of technologies that came from foreign countries began. As time has shown, these technologies have proven themselves well. One of these technologies that are successfully used in construction work is called the bulk floor. The technology, constantly improving, allows you to use almost all residential premises, as well as warehouses, parking lots, agricultural, medical and institutions of other types. It remains to choose which type of flooring is most suitable.

The basis of the floor is a concrete screed, it must be thoroughly dried and degreased. After all this, concrete primer is performed. A special primer of deep penetration is used for the primer. It allows you to carefully clog all microcracks and serves as a hitch and gluing material. The primer after the coating requires twenty -four -hour drying. Primer work is performed by a roller or brush.

Before pouring the floor, you need to familiarize yourself with the composition and method of preparation for mixing all components. At the moment, there are several types of such bulk floors: a polymer coating can have both a uniform color, any color, and complete transparency.

Recently, the technologies for the manufacture of flood floors with the 3D effect have been successfully used. What is it? In fact, this is a coating using an optical effect. The image is selected that is suitable in size and the polymer coating that will serve as the surface.

Depending on the size of the room and material, the bulk of it, its price, will be of different. This kind of robot is best ordered to specialists who do this kind of work. 3D floors do not need special coating, unless they are warm enough. Banner depicting the drawing should have good elasticity.